Faärken
Biker Stirrups allow you to enjoy the freedom of not having to constantly pull
your pant legs down while cruising. Just clip them onto the bottom of your pant
leg, and the elastic strap fits underneath your boots or shoes. Cool
from head to toe!
Faärken, Inc. Biker
Stirrups are hand-crafted in the USA using the finest components available. The conchos and clips are first copper
plate and then nickel plated to prevent rust and keep their shine and luster.
The straps are made of a durable, elastic material and includes a metal
Triglide adjuster to fit every size. Please click on the images to see a larger
product view.
Faärken, Inc. Biker Stirrups
work best when wearing boots or shoes with heels. If you wear your pants
according to your inseam, you will find that my Faärken, Inc. Biker Stirrups
not only look great while riding, but you’ll want to wear them when you’re just
hangin’ out.
Instructions for proper use
· DO
NOT PLACE THE CLIPS ON THE SEAM!!!
· DO
NOT FORCE THE CLIP CLOSED IF THERE IS TOO MUCH RESISTANCE!!!
· If
there is too much resistance, move the clip to an area of the cuff where the
clip closes easily and with a snap.
· Forcing
the clip closed while on the seam or placing too much fabric too deep inside
the clip jaw will cause the tension tab of the main clip to curl or bend and it
will no longer stay closed.
· PLACE
THE CLIP IN FRONT OR BEHIND THE SEAM.
· Please
make sure your stirrups are securely fastened to the bottom edge of your pants
before riding.
· While
standing, adjust the length of the strap so the pants are tight against the top
of the boot. Move the triglide adjuster towards the end of the strap so that
the unused portion of the elastic strap is not left loose. Please be sure that
your stirrups are securely fastened to your pants before riding. Faarken, Inc.
assumes no responsibility for any damages in the unlikely event that they
should come loose while riding.
If the tension tab is bent,
please follow these instructions.
Tension tab should be at
right angle to the main clip. If bent or curled, use pliers to straighten.
If you need to replace the main clip, use needle
nose pliers to carefully bend out one hinge. HOLD ON TO THE CLIP SO
THAT IT DOES NOT COME APART. Replace with a new clip and bend hinge
back into place.
This product was added to our catalog on Saturday 29 May, 2010.
